Abus SECVEST Installer Manual page 150

Configuration
150
If the power supply is restored before the end of the set delay time, "General Fault"
outputs are reset and a log book entry is created about the power restore.
No errors are reported.
If the fault still exists after the end of the configured time, a warning tone sounds
and the error is reported.
"A/C Fault" outputs are activated.
A user can stop the warning tone by entering their code.
The alarm panel display shows details of the warning. "General Fault" and "A/C
Fault" outputs remain activated.
If the fault has been corrected, the alarm panel deactivates the "A/C Fault" outputs
and creates a log book entry about the power restore.
A user can reset the alarm and the "General Fault" outputs after entering their user
code.