Abus SECVEST Installer Manual page 337

Note
This message will display: Network initialisation, please wait...
Note
You can tell an update process is running from the following 3 processes on the alarm panel.
1)
Menu keys light up
Arm/disarm keys flash
Number keys are dark
4.
Menu keys light up
Arm/disarm keys are dark
Number keys flash
3)
Menu keys are dark
Arm/disarm keys start flashing again to show that the upgrade process is almost finished.
Number keys are dark
The first point of the start wizard appears (language selection).
If a touch front is installed, no keys light up during this process.
Appendix
337