Abus SECVEST Installer Manual page 110

Configuration
Fault comm. path
Full Set Ready
Full Setting Complete
110
The system is VdS compliant if you use this output type
for signalling an AC fault. This output type is now trig-
gered after a VdS-compliant delay in the event of an AC
fault.
The output is activated as soon as the alarm panel identi-
fies a fault in the communication method and is deac-
tivated when the fault no longer exists.
This output is activated when the partition is ready to be
armed.
If a detector is assigned to more than one partition, the
partition in question is ready even if this detector is still
open.
The output is activated as soon as the system is success-
fully armed. The output is activated for approx. 10 sec-
onds.
No
Yes
Yes