Abus SECVEST Installer Manual page 98

Configuration
5. Exit the entry with Back.
Note
If a repeater has been taught in the symbol
pears next to the repeater number on the alarm
panel display.
A maximum of 4 repeaters can be added
6. Exit this display with Back.
Edit
Select the corresponding repeater.
The following sub-menu items appear.
Name:
Assign a unique name for this repeater.
Repeat alarm panel
Select whether wireless messages from the alarm panel
should be repeated by this repeater.
Note
Messages from the alarm panel could be:
Broadcast alarm panel status – is necessary for the per-
manent display of the status of the partitions on the
control panel FUBE5000x
Control of external sirens (e.g. FUSG50100/1 or
FUSG50000)
Control of internal sirens (e.g. FUSG50010) and infor-
mation modules (e.g. FUMO50030)
Control of indoor sounder (e.g. FUSG50110)
Control of hybrid modules (e.g. FUMO50110) – is neces-
sary for the configuration and/or requesting of cur-
rent and voltage values, the software version, the re-
sistance values, the outputs, the loudspeaker and
the signal strength.
Control of wireless outputs (e.g. wireless socket
FUHA50010)
98
ap-