Sw Default Values/Factory Defaults; Installer Mode - Abus SECVEST Installer Manual

SW default values/factory defaults

Note
The Secvest alarm control panel meets the requirements of EN50131 if the default values are retained while
taking the note into account. If you change these settings, the installation may no longer be compliant. If the
Secvest alarm control panel is no longer compliant with EN30131, you must remove all markings suggesting it
is compliant.

Installer Mode

MENU option
1. COMPONENTS
Detectors
IP zones
Add/Del Detectors
Zone 1nn
Device Type
Trigger Mode
Trigger Events
Camera Action
Trigger Partitions
IP address
HTTP Port Internal
HTTP Port External
RTSP Port Internal
RTSP Port External
User name
Password
Reaction time
Edit Zones
Name
Type
Default settings
Default values
IPCx Range
External
No
Videos No
Pictures Yes
Partition 1 Yes
Partition 2 Yes
Partition 3 Yes
Partition 4 Yes
All partitions Yes
Empty
80
Empty
554
Empty
Empty
Empty
20 s
Zone 10x
Not used
Comments
Zone 101 to 103
Zone 101 to 106 (S/W 1.01.00 and
later)
Only appears if Trigger Mode = "Ex-
ternal" or "Int. + Ext."
Appears for IPCx range only
Only appears if Trigger Mode = "Ex-
ternal" or "Int. + Ext."
Range of 1 s to 99 s
Zone 101 to 103
Zone 101 to 106 (S/W 1.01.00 and
later)
Appendix
305