Abus SECVEST Installer Manual page 82

Configuration
Delete All
1. Select Delete All.
2. Confirm the selection with Next.
3. Confirm the security prompt with Yes to delete the
zone or select Back if you are not sure.
Note
Hybrid module zones can be assigned to other partitions but they should be hybrid module partitions.
Refer to the assignment of partitions for the hybrid module. Notifications from the hybrid module, such as tamper or
DC fault notifications, are then assigned to these partitions.
Note
The wiring type (Wired Zone Type) for the zone inputs of this hybrid module can be set under
Components -> Hybrid Module.
82
Note
The description of the configuration of the zone
name, partition, zone type and zone attributes can
be found after the "IP zones" overview.