Abus SECVEST Installer Manual page 75

Configuration
Type Explanation
open but disabled on the control panel at the same time, the alarm panel may return to the "Set"
status.
Note
With the zone attribute "Part Set" = ON
A change to this zone changes the status of the alarm panel from Disarmed to Part Set (in accord-
ance with the programmed output mode).
Note
The attributed "inverted" (only for wired zones) switches the behaviour of this zone.
Note
Implement cable tamper monitoring for wired zones of this type, particularly for access control and
home automation applications.
The user cannot reset the system from an Only enabled zone.
75