Configuring Hymo Wired Outputs - Abus SECVEST Installer Manual

Configuration

Configuring HyMo wired outputs

Note
Each hybrid module features four relay or wired
outputs.
Editing outputs
1. Click in the line of the desired output.
Note
It is useful to assign unique output names so that
if a fault occurs it is easier to identify the affected
output.
2. Delete the preset name.
3. Assign a unique name for the output with max. 12
characters.
4. Confirm the selection once the configuration is com-
plete by selecting Submit
116
Inverting outputs (polarity)
Note
You can choose here whether the function of the
output in question is inverted or not. Select Nor-
mal or Inverted.
The HyMo output is a relay output.
For Normal:
It is possible to open (NC-C) or close (NO-C) a
connected circuit.
If inverted the opposite is the case!
It is possible to open (NO-C) or close (NC-C) a
connected circuit.
Selecting the output type
Note
An overview of the different output types can be
found in the "Wireless outputs" section.
1. Select menu item Type.