Abus SECVEST Installer Manual page 284

Appendix
Internal Siren
Communication modules, plug-in
Ports
Backup batteries
Display
Protection and security
Security level
Environmental class
Tamper protection (detection/protection)
Wireless components, differentiation
Wireless supervision
Access codes
Quantity of access codes
Access code differentiation
Quantity of proximity tags
(chip keys)
Proximity tag differentiation
Temporary authorisation for user access
284
1 memo message (user menu)
30 seconds
58/56 zone names (user menu)
2 seconds for each zone
6 IP zones
48 wireless zones
4/2 wired zones
1 (integrated piezo sounder)
Sound pressure level > 96 dB(A) @ 1 m
1
1x Ethernet
1x a/b
1x USB
1x SD card
2
3.5", effective area 84 mm x 45 mm, 240 x 128 pixel monochrome
(greyscale) LCD, white backlighting
Level 2
(EN 50131-1 + A1:2009 Section 6, EN 50131-3:2009 Section 6)
II
(EN 50131-1 + A1:2009)
Type B
(EN 50131-3:2009 Section 8.7)
24
16,777,214 (2 -2) different IDs per component type
Configurable
There is no default installer code.
There is no default administrator code.
S/W <=1.01.00
It is absolutely essential to change the default code (ad-
ministrator user code: 1234 or 123456) during installation.
50 plus one installer
10,000 code variants with 4-digit codes (0000–9999)
The digits of the code are numbers between 0 and 9.
10 4 = 10x10x10x10 = 10,000 (combinatorial variation)
1,000,000 code variants with 6-digit codes (000000–999999)
The digits of the code are numbers between 0 and 9.
6
10 = 10x10x10x10x10x10 = 1,000,000 (combinatorial variation)
50
32
4,294,967,296 (2 , 2^32)
There is no facility for providing temporary access (e.g. PIN code
or proximity keyfob which is only valid for a limited time or a spec-
ified quantity).