Abus SECVEST Installer Manual page 265

Alarm panel
# key
Press this key to delete the recorded signal strengths for the selected component.
* key
Press this key to delete the recorded signal strengths for the entire list.
Signal Detectors
strengths
The display shows the signal strength of each taught-in detector.
(cont.)
S/W <2.00.00 The zone names are displayed. To view the zone numbers, press the right menu key
Wireless control panel
The display shows the signal strength of each taught-in control device.
External Sirens
The display shows the signal strength of each taught-in wireless external siren.
Indoor sounder
The display shows the signal strength of each taught-in indoor sounder.
WAM
The display shows the signal strength of each taught-in WAM.
Door locks
The display shows the signal strength of each taught-in door lock.
Hybrid module
The display shows the signal strength of each taught-in hybrid module.
Here you can find 2 displays
Signal on the alarm panel
This is the signal strength of the hybrid module at the alarm panel.
Signal on the HyMo
This is the signal strength of the alarm panel at the hybrid module.
Note
Both signal strengths are approximately the same. However, the signal strengths "alarm panel -> HyMo"
and "HyMo -> alarm panel" can deviate slightly from each other. The reasons for this are:
different antennas on the alarm panel and HyMo
different radio wave propagation characteristics in the different directions
Configuration
265