Abus SECVEST Installer Manual page 294

Appendix
EU Directives
RED: 2014/53/EU
EMC: 2014/30/EU
RoHS: 2011/65/EU
WEEE: 2012/19/EU
ErP: 2009/125/EU
Low voltage: 2014/35/EU
General safety: 2001/95/EG
Declarations of compliance
for the FUAA50000, FUAA50500, FUAA50010, FUAA50510, FUAA50100, FUAA50600, FUAA50110 and
FUAA50610 Secvest wireless alarm panel systems.
Standards with which the alarm panel claims compliance.
Certification body: Telefication B.V.
EN 50131-1:2006+A1:2009
EN 50131-3:2009
EN 50131-5-3:2005+A1:2008
EN 50131-6:2008+A1:2014
EN 50131-10:2014
EN 50136-2:2013
Certification body: ANPI
INCERT TO31 2014 edition
Security level: Level 2
Environmental class: Class II
If the alarm panel has been installed correctly, the Secvest will be compliant with EN 50131 Grade 2.
The Secvest is compliant with EN 50131-1 and EN 50130-5 environmental class II.
Power supply is compliant with EN 50131-1:2006+A1 2009 Section 9 and EN 50131-6:2008+A1:2014 if the alarm
panel has been installed correctly.
The alarm transmission system (ATS) is compliant with EN 50136-1:2012 as an SP2 communicator.
At Grade 2 the integrated SP2 communicator provides a compliant communicator for the Secvest
on the condition that
a) it is installed as specified in the installation instructions
b) the connected PSTN, LAN and GSM/wireless mobile work normally,
c) the alarm receiving centre has the right equipment.
The wireless mobile module (for Types see Technical Data -> Communication) can be used as an optional communi-
cator for Grade 2.
294