Abus SECVEST Installer Manual page 52

Configuration
Partitions
Outputs
Housing Tamper
Sounder Tamper
RF Jamming
Alarm panel A/C fault
External DC fault
Ext. DC In - U
Battery status
Auxiliary
S/W >=3.00.05
52
Number of partitions in use
Overview of available and configured outputs
Wireless outputs (WIRELESS), wired outputs of the alarm panel (WIRED),
HyMo outputs (H/M)
Specifies whether the tamper contact on the front of the housing or the wall tamper
contact has been triggered
Specifies whether the tamper contact on the wired, connected siren has been trig-
gered (TR input on the alarm panel)
Specifies whether the alarm panel has detected RF jamming
Displays whether the alarm panel is connected to 230 V or if a fault is present
Displays whether the alarm panel is connected to 13.8 V external DC power supply
or if a fault is present.
Specifies the voltage of the external DC power supply
Status of each battery (with voltage if required)
Output voltage to the power supply output terminal