Network Setup - Abus SECVEST Installer Manual

Network setup

Name/function
Internal HTTP port
Internal HTTPS port
DHCP
IP address
Explanation (checkbox)
Internal HTTP port
Internal HTTPS port
Note
SW >= 3.00.05
The change to the internal HTTPS port only takes effect once the alarm panel has
been rebooted.
To do this, log out of Installer mode and reboot the alarm panel.
More details can be found in the section "Manual restart (switching off and switching
back on)".
Enabled
The Secvest receives the IP data from the DHCP server.
Deactivated
Manual input of IP data.
IP address
S/W <2.00.00: If nothing is entered here, the alarm control panel automatically uses
DHCP.
Note
Configuration
185