Abus SECVEST Installer Manual page 70

Configuration
HTTP Port Internal
HTTP Port External
RTSP Port Internal
RTSP Port External
User name
Password
Reaction time
Apply the settings with the "Submit" button.
Assigning a zone name
Note
It is useful to assign unique zone names so that if
a fault occurs it is easier to identify the affected
detector.
Example: MD stands for motion detector, location:
office01, so detector name is MD-office01
1. Click in the Name text field.
2. Delete the preset name (Zone 01).
3. Assign a unique name for the zone with max. 12
characters.
4. Confirm the new name once the configuration is
complete by selecting Submit.
70
HTTP port of the camera in the internal network (default setting: "80")
External HTTP port for which port forwarding in the router is configured
RTSP port of the camera in the internal network (default setting: "554")
External RTSP port for which port forwarding in the router is configured
Default "Root" setting, no user name is assigned from S/W 1.01.00 onwards
Default setting – no password assigned
Indicates the maximum amount of time that the alarm panel will wait for command
responses from the camera. If the response time exceeds the configured time, a
fault indication will be generated.
Default setting – 20 s, range of 1 s to 99 s
Selecting the zone type
Note
The preset zone type can be changed here.
Note the description of the zone types in this sec-
tion.
A zone is a detector that is taught into the wire-
less alarm panel.
Zones can have different attributes.
The detector does not know whether the wireless
alarm panel is armed or disarmed.
For this reason, detectors always send an alarm
to the alarm panel if they register a change.
The alarm is only then analysed in the wireless
alarm panel to determine whether the notification
triggers an alarm response or not.