Abus SECVEST Installer Manual page 97

Hide thumbs Also See for SECVEST:

Table of Contents

Add RF repeater (alarm panel)

Select RF repeater.

Select Add/Del.

Select the corresponding repeater.

Trigger the tamper contact of the repeater.

The following course of action is the same as is described for the alarm panel's

menu guidance below.

Click on this field and in the next step confirm the security prompt to delete all re-

When a repeater has been taught in, the wireless

alarm panel beeps twice to confirm.

A message appears on the display to confirm that

the repeater was added, and the value for the re-

ceived signal strength is shown.

You can see the receiving signal strength of the

alarm panel on the repeater through the status

LEDs. Details on this can be found in the repeater

Configuration