External Sirens; Wireless Sirens - Abus SECVEST Installer Manual

Configuration

External Sirens

Wireless sirens

Name/function
Number
Name
Adding sirens
1. Select Radio Siren.
2. Select Add/Del Siren.
3. Select the corresponding siren.
4. Trigger the tamper contact of the siren.
Note
When the siren has been taught in, the wireless
alarm panel beeps twice to confirm.
A message appears on the display to confirm that
the siren was added, and the value for the re-
ceived signal strength is shown.
5. Exit the entry with Back.
Note
If a siren has been taught in the symbol
pears next to the siren number on the alarm panel
display.
86
Explanation
The number comprises the component type (radio siren) and a consecutive num-
ber.
Unique name of the radio (wireless) siren
ap-
6. Exit this display with Back.
7. Select edit Ext. siren.
8. Select the taught-in Ext. Siren.
Note
If the external siren is activated, when the corre-
sponding partition triggers a local or external
alarm, the partition must be set to Yes.
Delete All
1. Select Delete All.
2. Confirm the selection with Next.
3. Confirm the security prompt with Yes to delete the si-
ren or Back if you are not sure.