Abus SECVEST Installer Manual page 273

• Ext. DC voltage in
• Panel Battery 1
• Panel Battery 2
• Aux. Voltage Out
HyMo PSU Here you can see the voltage value of the external DC power source at the terminal connection 0 V /
12 V IN of the hybrid module.
WBI:
Contains additional information including
Number
the internal number within the alarm panel software
Name
the unique name selected for this hybrid module
Partitions
the numbers of the partitions to which the hybrid module is assigned
Loudspeaker partitions
the partitions for which the optionally connected loudspeaker should provide a signal
RF re- Here you can find information about the signal strength of the components on the repeater. This
peater is the signal strength on the repeater of the received notifications from the components. The display is
identical on the alarm panel and the web interface
14.1 volts
8.3 volts
0.1 volt
13.9 volts
Configuration
273