Table of Contents
Advertisement
Chapter 5, Memory Cards/Mass Storage
Mass Storage Access
Mass Storage Access
Program and data files stored on the Test Set's various mass storage locations can
be selectively accessed from the following screens:
•
•
•
•
Save/Recall register files, stored on the Test Set's various mass storage locations,
can be accessed using the front-panel Save and Recall keys.
246
S:\agilent\e8285\USRGUIDE\BOOK\CHAPTERS\memcard.fb
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The TESTS (IBASIC Controller) screen.
Any type of file can be accessed from this screen, either through an IBASIC program
or the IBASIC command line.
The TESTS (Main Menu) screen using the Select Procedure Location: and
Select Procedure Filename: fields.
Only procedure files shipped with Agilent Technologies 83217 software or procedure
files created using the TESTS (Save/Delete Procedure) screen of the TESTS Sub-
system can be accessed using these fields. When created, procedure file names are pre-
fixed with a lower case .PRC file extension (FM_TEST.PRC).
A corresponding code file - prefixed with .PGM (FM_TEST.PGM must reside on the
same media for the procedure to work. Refer to the TESTS Screen chapter in the
Agilent Technologies E8285A Reference Guide for further information.
The TESTS (Save/Delete Procedure) screen using the Select Procedure
Location: and Enter Procedure Filename: fields.
This screen is used to create "procedure" files. When created, procedure file names are
prefixed with a .PRC file extension (FM_TEST.PRC).
The Signaling Decoder screen in NMT mode.
Only user-written NMT tests can be accessed from this screen. NMT test files must be
saved with a .NMT file extension (NMT_1.NMT).
Advertisement
Table of Contents
