Table of Contents
Advertisement
Chapter 4, Status Reporting
GPIB Status Register Groups
Table 7
CDMA Status Register Group Bit Assignments
Is Condition
Bit Number
Register
Implemented?
15
14
YES
13
NO
12
NO
11
NO
10
NO
9
NO
8
NO
7
YES
6
YES
5
YES
4
YES
126
S:\agilent\e8285\USRGUIDE\BOOK\CHAPTERS\hpibstat.fb
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Condition/Event
Not Used (Always 0)
CDMA Power Control Ramping
MS Reported FER Received
Pilot Strength Message Received
CDMA Mobile Registered
CDMA FER Test Passed
CDMA FER Test Failed
CDMA FER Test Max Frames
CDMA Service Option 2
CDMA Hard Handoff
CDMA Softer Handoff
CDMA Call Alert
Comment
Defined by SCPI Version 1994.0
This event register bit will be set to a
logic 1 when the MSUT reports FER.
MS reported FER is influenced by the
MS FER Report Interval fields.
This event register bit will be set to a
logic 1 when the Test Set receives a
Pilot Strength message from the MSUT.
Each Pilot Strength message will
update the CDMA Mobile Reporting
table, which displays the Status, PN
Offset, Strength, and Keep bit for
CDMA pilot signals.
This event register bit will be set to a
logic 1 when the front panel display
annunciator "Registering" goes out,
indicating the mobile station has
registered.
The Alerting Condition Register bit will
be set to logic 1 while the MSUT is
ringing. This only occurs during a
Service Option 1 call from the Test Set
(MSUT terminated).
Advertisement
Table of Contents
