Table of Contents
Advertisement
Chapter 3, Operating Overview
Triggering Analog Measurements In Local Mode (Front Panel Operation)
For Analog
•
Measurements (other
than Signaling
Decoder)
Manual Operation:
1. Press then release the Shift key, then press the
Meas reset key to HOLD measurement results.
2. Select HOLD again to return to Repetitive mode.
Meas Reset begins a measurement cycle, interrupting any measurement in progress.
78
S:\agilent\e8285\USRGUIDE\BOOK\CHAPTERS\opoverv.fb
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Repetitive retriggering is the only trigger mode available from the front panel for
analog measurements (other than the Signaling Decoder). Single trigger mode can be
simulated using the Test Set's measurement hold feature. Selecting the Hold key causes
all currently displayed measurement results to be held on the screen and stops the
measurement cycle. To resume making measurements press the Hold key again.
Preset
Hold
Meas
reset
Address
Local
Save
Recall
Advertisement
Table of Contents
