Table of Contents
Advertisement
Chapter 3, Operating Overview
To Change the Measurement Display
To remove a limit you have set:
1. Position the cursor in front of the unit-of-measure for the measurement you assigned
2. Press and release the Shift key, then the down-arrow (LO LIMIT) or up-arrow (HI LIM-
GPIB Example
The following GPIB command sets limits for the average power measurement.
These limits will indicate if the power level is between
"DISP CTXT;MEAS:CDM:AVGP:LLIM -5;LLIM:STAT ON;:MEAS:CDM:AVGP:HLIM
5;HLIM:STAT ON"
The
measurement field.
54
S:\agilent\e8285\USRGUIDE\BOOK\CHAPTERS\opoverv.fb
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
the limit to.
IT key, then press the Yes On/Off key.
limit and
limit annunciators will appear below the
Hi
Lo
−
5 dBm and 5 dBm.
Avg Power
Advertisement
Table of Contents
