Table of Contents
Advertisement
Chapter 4, Status Reporting
GPIB Status Register Groups
Table 13
Hardware 1 Status Register Group Bit Assignments (Continued)
Is Condition
Bit
Register
Number
Implemented?
4
YES
3
YES
2
YES
1
YES
0
YES
Accessing the Hardware Status Register #1 Group Registers
The following sections show the syntax and give programming examples, using
the HP
access the Hardware Status Register #1 Group registers.
Reading the Condition Register
Syntax
STATus:HARDware1:CONDition?
Example
OUTPUT 714;"STAT:HARD1:COND?"
ENTER 714;Register_value
160
S:\agilent\e8285\USRGUIDE\BOOK\CHAPTERS\hpibstat.fb
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Condition/Event
Power-up Self Test Failed
Overpower Protection Tripped
CDMA_1 Status Register
Group SMB
External Mike Keyed
Battery Voltage Low
®
BASIC programming language, for the STATus commands used to
Comment
Not used. Hardware not present in the
E8285.
Advertisement
Table of Contents
