Interfacing to the IBASIC Controller using Serial Ports
This section describes how to interconnect the Test Set to an external PC or
terminal using the Test Set's serial I/O ports. Program development methods #2
and #3 use PC's or terminals connected to the Test Set through the Test Set's serial
I/O ports. To determine which programming environment best fits your
application, refer to
Test Set Serial Port Configuration
To prepare for IBASIC program development, the Test Set must first be
configured to operate with a PC or terminal.
This includes,
•
•
•
There are two independently controllable serial interfaces in the Test Set, Serial
Port 9 and Serial Port 10. The IBASIC Controller can send and receive data from
either port by using its assigned select code.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
"Choosing Your Development Method" on page 287
Hardware
Cables
Screens - I/O CONFIGURE and TESTS (IBASIC Controller)
Interfacing to the IBASIC Controller using Serial Ports
Chapter 6, IBASIC Controller
.
275