Table of Contents
Advertisement
Chapter 6, IBASIC Controller
Interfacing to the IBASIC Controller using Serial Ports
(the first five of the following Communications
d. Select Communications
choices for your PC Serial Port should match your Test Set settings).
1. Baud Rate: 9600
2. Data Bits: 8
3. Stop Bits: 1
4. Parity: None
5. Flow Control: Xon/Xoff
6. Connector: COM1, COM2, COM3, or COM4 depending on your PC
setup
7. Parity Check: Off
8. Carrier Detect: Off
281
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
