Table of Contents
Advertisement
Numbered GPIB Error Descriptions
The following
•
•
•
•
•
The negative numbers which precede the error message text correspond to the error
conditions outlined in the Standard Commands for Programmable Instruments (SCPI). For
more information on SCPI, order the following book,
A Beginner's Guide to SCPI Addison-Wesley Publishing Company ISBN 0-201-56350-9.
NOTE:
GPIB Parser. The term "Parser" is used in the following error message descriptions. It
refers to the Test Set's GPIB command parser.
Error −100
Command error
This code indicates only that a Command Error as defined in IEEE 488.2, 11.5.1.1.4 has
occurred.
Error −101
Invalid character
A syntactic element contains a character which is invalid for that type.
Error −102
Syntax error
An unrecognized command or data type was encountered; for example, a string value was
received when the device does not accept strings.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
GPIB errors
can be generated under any of the following conditions:
controlling the Test Set with an IBASIC program running on the built-in IBASIC con-
troller
controlling GPIB devices/instruments, connected to the Test Set's external GPIB bus,
with an IBASIC program running on the built-in IBASIC controller
controlling the Test Set with a program running on an external controller
using the Test Set manually to print to an external GPIB printer
using the Test Set manually to access procedure/library/code files stored on an external
GPIB disk
Error Messages
357
Advertisement
Table of Contents
