Agilent Technologies E8285A User Manual page 128

Cdma mobile station test set
Hide thumbs Also See for E8285A:
Table of Contents

Advertisement

Table 7
CDMA Status Register Group Bit Assignments (Continued)
Is Condition
Bit Number
Register
Implemented?
3
YES
2
YES
1
YES
0
YES
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Condition/Event
CDMA Call Connected
CDMA Cell Transmitting
CDMA Page Sent
Access Probe Received
Chapter 4, Status Reporting
GPIB Status Register Groups
Comment
The "Connected" Condition Register
bit will be set to a logic 1 when a call is
connected. See the Connected
(annunciator) field description in the
E8285A Reference Guide.
The "Transmitting" Condition Register
bit will be set to a logic 1 when the Test
Set is in CDMA mode. See
"CDMA
and Analog Modes" on page
The "Page Sent" Condition Register bit
will be set to a logic 1 when the Call
key is pressed or the corresponding
GPIB command is sent. This Condition
bit will remain 1 until the current call or
call attempt has ended. See the Page
Sent (annunciator) field description in
the E8285A Reference Guide.
The "Access Probe" Condition Register
bit will be set to a logic 1 when a
mobile station sends an access probe
sequence to the Test Set.. This Condi-
tion bit will remain 1 until the current
call or call attempt has ended. See the
Access Probe (annunciator) field
description in the HP E8285A
Reference Guide.
21.
127

Advertisement

Table of Contents
loading

Table of Contents