Table of Contents
Advertisement
To Enter Hexadecimal Values
Hexadecimal (Hex) values are used for entering some signaling parameters, such
as MIN (Mobile Identification Number). No unit-of-measure is associated with
these values.
Hexadecimal values are either entered from the keypad (using the A-F shifted
functions), or by using the
Front-Panel Example
The following front-panel operation enters the Hexadecimal number
#H0D2565F15 into the MIN field.
1. Move the cursor to the field below MS ID.
2. If the field currently says Phone Num press the Enter key, use the CURSOR CON-
3. Use the CURSOR CONTROL knob to select the numeric entry field below MIN.
4. Enter 0, then press and release the Shift key, then the 3 key (to select D), enter 2565,
GPIB Example
The following GPIB command also enters the Hexadecimal number 0D2565F15
into the MIN field.
"DISP CCNT;CDMA:MOB:MIN '0D2565F15'"
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Choices
TROL knob to select MIN, and press the Enter key again. (If MIN is already selected,
proceed to step 3.)
press and release the Shift key, then the 5 key (to select F), enter 15, and then press the
Enter key. This is the hexadecimal code derived from the phone number
321-456-7890.
Chapter 3, Operating Overview
To Enter and Change Values
menu.
59
Advertisement
Table of Contents
