Table of Contents
Advertisement
Error −330
Self-test failed
Error −350
Queue overflow
This code indicates that there is no room in the queue and an error occurred but was not
recorded. This code is entered into the queue in lieu of the code that caused the error.
Error −400
Query error
This code indicates only that a Query Error as defined in IEEE 488.2 11.5.1.1.7 and 6.3
has occurred.
Error −410
Query INTERRUPTED
Indicates that a condition causing an INTERRUPTED Query error occurred (see IEEE
488.2, 6.3.2.3). For example, a query followed by DAB or GET before a response was
completely sent.
This message appears when you query a measurement without immediately entering the
returned value into a variable. For example, the following program lines query the TX
Frequency measurement and enter its value into a variable (Rf_freq):
OUTPUT 714;"MEAS:RFR:FREQ:ABS?"
ENTER 714;Rf_freq
Error −420
Query UNTERMINATED
Indicates that a condition causing an UNTERMINATED Query error occurred (see IEEE
488.2, 6.3.2.2.). For example, the device was addressed to talk and an incomplete program
message was received.
This message usually appears when trying to access a measurement that is not active. For
example, you cannot query the DTMF Decoder measurements from the DUPLEX TEST
screen, or query the TX Frequency measurement when the TX Freq Error
measurement is displayed.
Error −430
Query DEADLOCKED
Indicates that a condition causing a DEADLOCKED Query error occurred (see
IEEE 488.2, 6.3.1.7). For example, both input buffer and output buffer are full and the
device cannot continue.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Error Messages
369
Advertisement
Table of Contents
