Table of Contents
Advertisement
Chapter 3, Operating Overview
Using User Keys
To Assign Local USER Keys
1. Move the cursor to the field you want to assign a local USER key to.
2. Press and release the Shift key, then the K4 key to select the ASSIGN function. Press a
Example of Assigning a Local USER Key
Use this example to assign local USER key K1 to the
TEST screen.
1. Access the RX Test screen and position the cursor in front of the Filter 1 field.
2. Press and release the Shift key, then the K4 key to select the ASSIGN function.
3. Press K1. A small 1 appears next to the field indicating that USER key K1 has been
4. Move the cursor to any other field on the screen and press K1. The cursor immediately
To Release Local USER Keys
1. Display the screen containing the USER key assignment to be removed.
2. Press and release the Shift key, then the K5 key to select the RELEASE function.
3. Press the USER key (K1-K5) that you want to release.
66
S:\agilent\e8285\USRGUIDE\BOOK\CHAPTERS\opoverv.fb
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
local USER key (K1-K5). The USER key number appears in front of the field you as-
signed it to.
assigned to it.
returns to the Filter 1 field. The field is also highlighted to change the entry using
the CURSOR CONTROL knob or arrow keys.
field in the RX
Filter 1
Advertisement
Table of Contents
