Table of Contents
Advertisement
11. Terminal emulation: VT-100
Duplex: FULL
Flow Control: XON/XOFF
CR translation (in): CR
CR translation (out): CR
BS translation: NON-DEST
BS key definition: BS
Line wrap: ON
Scroll: ON
Break length (ms): 350
Enquiry (CNTL-E): OFF
12. Press Esc to exit Terminal Setup back to the Setup Menu.
13. Enter the number 4 for General Setup.
Translate Table: OFF
Alarm sound: OFF
Alarm time (secs): 1
Aborted downloads: KEEP
14. Press Esc to exit General Setup back to the Setup Menu.
15. On the Setup Menu, press S to save your entries.
16. Press Esc to exit the Setup Menu.
17. Press Alt+X to exit ProComm back to MS-DOS.
Setting Up Agilent Technologies AdvanceLink ( 68333F Version B.02.00) on your
PC
Agilent Technologies AdvanceLink is a software program which allows PCs to be
used as an alphanumeric or graphics terminal. It can also automate terminal and
file-transfer functions. The version described will work with PCs with the
MS-DOS or PC-DOS operating systems. (AdvanceLink for Windows is also
available, and configuration is very similar).
Running AdvanceLink in MSDOS
1. Press the Tab key to move from one field to the next, which also accepts the displayed
choice.
2. Press the NEXT CHOICE and PREVIOUS CHOICE keys to move among the choices
for a particular field.
Setting up the AdvanceLink Software
1. Press the TERMINAL function key.
2. Press Config KEYS.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Interfacing to the IBASIC Controller using Serial Ports
Chapter 6, IBASIC Controller
283
Advertisement
Table of Contents
