Table of Contents
Advertisement
Selecting the
IBASIC Command Line
To use the IBASIC EDIT Mode for program development, the
Line
to the
ASCII characters through Serial Port 9, will appear on the
Line
attempt to execute the command. To display the
the Test Set execute the following steps:
1. Press the Tests key.
2. The TESTS (Main Menu) screen will be displayed.
3. Using the rotary knob, position the cursor on the IBASIC Cntrl field and select it.
4. The TESTS (IBASIC CONTROLLER) screen will be displayed.
5. The small horizontal rectangle at the top-left is the IBASIC Command Line
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Method #2. Developing Programs on the Test Set Using the IBASIC EDIT Mode
Field
field must be displayed on the Test Set and Serial Port 9 must be connected
IBASIC Command Line
field. When a carriage return/line feed is encountered, the Test Set will
Chapter 6, IBASIC Controller
field. An IBASIC command, sent as a series of
IBASIC Command Line
IBASIC Command
IBASIC Command
field on
297
Advertisement
Table of Contents
