Table of Contents
Advertisement
Chapter 3, Operating Overview
Saving and Recalling Instrument Setups
To Recall an Instrument Setup
1. Press and release the Shift key, then the Previous key to access the I/O CONFIGURE
2. Press the Recall key.
3. Use the knob to select the desired setup to be recalled from the Recall menu at the
Front-Panel Example
This example recalls the current instrument settings.
Press RECALL, 1, 2, 3, ENTER. The saved instrument settings are recalled.
GPIB Example
The following GPIB command also recalls register 123.
"REG:REC 123"
To Clear All SAVE Registers
1. Press the Recall key.
2. Use the knob to position the cursor in front of the entry in the Recall menu at the
3. Press the knob or the Enter key. A prompt appears at the top of the screen to verify that
4. Press the Yes On/Off key to select YES.
GPIB Example
The following GPIB command clears all registers
"REG:CLE:ALL"
62
S:\agilent\e8285\USRGUIDE\BOOK\CHAPTERS\opoverv.fb
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
screen and select the media to recall settings from using the Save/Recall field. (The
default is internal memory.)
bottom right of the screen.
bottom right of the screen.
you want to clear all registers.
Advertisement
Table of Contents
