To Save A Waveform And/Or Setup To A Usb Mass Storage Device; Table 6 Recommended Signal Mapping - Agilent Technologies 7000B Series User Manual

Table 6
Label
TxRS232
RxRS232
I2C
I2C
SPI2 (2-wire)
SPI2
SPI3 (3-wire)
SPI3
SPI3
SPI4 (4-wire)
SPI4
SPI4
SPI4
CAN
LIN
To save a waveform and/or setup to a USB mass storage
device
1 Insert a USB mass storage device into the front or rear USB device
2 Press the [Save/Recall] key.
3 Press the Save softkey. The proposed file name will be shown in the
InfiniiVision 7000B Series Oscilloscopes User's Guide
Recommended Signal Mapping
Signal
Tx
Rx
Data
Clk
Clk
Data
~Chip Select
Clk
Data
~Chip Select
Clk
DataIn
DataOut
Data
Data
port.
"Save to file" prompt above the Save softkey. (If you want to change the
file name, press the File Name softkey. See
name" on page 209 for details.)
Saving, Recalling, and Printing
Scope Channel Maps to Logic
Analyzer Channel
Ch1 D0
Ch2 D1
Ch1 D0
Ch2 D1
Ch1 D0
Ch2 D1
Ch1 D0
Ch2 D1
Ch3 D2
Ch1 D0
Ch2 D1
Ch3 D2
Ch4 D3
Ch1 D0
Ch1 D0
"Creating a new file
6
215