Table of Contents
Advertisement
When Active Controller Capability is Required
The Test Set must be the Active Controller on the bus under the following
conditions:
1. whenever the Test Set needs to control any device connected to the GPIB bus, such as
2. whenever a screen image is printed to an external GPIB printer
3.
4.
5.
Passing Control Back to Another Controller
The Test Set has two methods of passing control back to another controller: 1)
automatically
IBASIC program. The two methods are described in the following sections.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
an external disk drive, an external printer, or an external instrument
w
henever an instrument configuration is saved or recalled from an external GPIB disk
drive
w
henever running any Agilent Technologies 11807 Radio Test Software package
which uses an external GPIB device such as a disk drive, a printer, or an instrument
w
henever running any IBASIC program which uses an external GPIB device such as a
disk drive, a printer, or an instrument
and 2) using the
Chapter 3, Operating Overview
Passing Instrument Control
IBASIC PASS CONTROL
command from an
89
Advertisement
Table of Contents
