Table of Contents
Advertisement
Chapter 6, IBASIC Controller
The TESTS Subsystem
The
location for the procedure to be loaded. The
field is used to select the name of the procedure to be loaded. The
field gives the user a brief description of the procedure currently selected in the
Select Procedure Filename:
To view all the Procedures available on the mass storage location currently
selected in the
Select Procedure Filename:
appear in the lower right corner of the screen, displaying all the procedure files
which are available. This is not a listing of the full contents of the selected mass
storage location, it is only a list of the procedures files that are stored on that
media.
TESTS Subsystem User-Interface Screens
The TESTS Subsystem allows the user to easily modify the test subroutines,
parameters, specifications and configuration to correspond to the requirements of
a specific radio. There are several user-interface screens provided to allow the
user to make modifications.
To access any of these screens, position the cursor on the desired field and push
the rotary knob.
•
•
•
•
•
•
•
•
•
342
S:\agilent\e8285\USRGUIDE\BOOK\CHAPTERS\ibasic.fb
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Select Procedure Location:
Select Procedure Location:
The Order of Tests screen lets the user select the desired test(s) from the full set of avail-
able tests in the loaded procedure file.
The Channel Information screen defines the transmit and receive frequencies used for
the selected tests.
The Pass/Fail Limits screen defines the specifications used to generate pass/fail mes-
sages during testing.
The Test Parameters screen is used to define instrument settings and characteristics to
match those of the radio being tested (audio load impedance, audio power, power sup-
ply voltage, etc.).
The External Devices screen identifies all connected GPIB equipped instruments and
their GPIB addresses.
The Save/Delete Procedure screen is used to save or delete Procedures.
The Printer Setup screen is used to select the printer used for IBASIC PRINT com-
mands and to configure the format of the printer page.
The Execution Cond screen is used to configure the IBASIC program execution condi-
tions.
The IBASIC Cntrl screen is the IBASIC Controllers display screen.
field is used to select the mass storage
Select Procedure Filename:
field.
field, position the cursor on the
field and push the rotary knob. A menu will
Description:
Advertisement
Table of Contents
