Table of Contents
Advertisement
Chapter 4, Status Reporting
GPIB Status Register Groups
Table 22
Standard Event Status Register Group Bit Assignments (Continued)
Is Condition
Bit
Register
Number
Implemented?
0
NO
Accessing the Standard Event Status Register Group Registers
The following sections show the syntax and give programming examples, using
the HP
access the Standard Event Status Register Group registers.
Reading the Event Register
Syntax
*ESR?
Example
OUTPUT 714;"*ESR?"
ENTER 714;Register_value
Clearing the Event Register
The EVENT register is cleared whenever it is queried or whenever the *CLS
Common Command is sent to the Test Set.
208
S:\agilent\e8285\USRGUIDE\BOOK\CHAPTERS\hpibstat.fb
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Condition/Event
Operation Complete
®
BASIC programming language, for the Common Commands used to
Comment
1 = The Test Set has completed
all selected pending operations
and is ready to accept new
commands. This bit is only
generated in response to the
*OPC IEEE 488.2 Common
Command.
Advertisement
Table of Contents
