Table of Contents
Advertisement
In this Book
Throughout this manual the term "Test Set" is used to denote the Agilent
Technologies E8285A.
Test Set screens shown in this manual may not match those displayed on the Test
Set in every detail.
Chapter 1, Getting Started
Chapter 2, Configuring Your Test Set
Chapter 3, Operating Overview
Chapter 4, Status Reporting
Chapter 5, Memory Cards, Mass Storage
Chapter 6, IBasic Controller
Error Messages
12
S:\agilent\e8285\USRGUIDE\BOOK\CHAPTERS\titlepg.fb
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
This chapter provides basic remote and front-panel operating procedures, a quick check
for verifying operation, GPIB programming procedures, and simple programming
examples.
This chapter provides information about setting screen intensity, setting RF voltage
interpretation, setting time and date, and setting beeper's volume.
This chapter explains how to specify units of measure, how to use the analog
meter, how to use measurement averaging, how to set a measurement reference,
how to set measurement limits, how to enter and change values, how to save and
recall instrument setups, how to use the USER Keys, and how to set a frequency
offset. It also describes some important interactions that occur between screen
settings.
This chapter provides information about the Test Set's status reporting structure
and status register groups.
This chapter describes memory cards and mass storage devices used with the
Test Set.
This chapter is designed to provide the programmer with the information
needed to develop IBASIC programs for use on the built-in IBASIC controller.
This section discusses error and operating messages.
Advertisement
Table of Contents
