Chapter 4, Status Reporting
GPIB Status Register Groups
Table 6
Call Processing Status Register Group, Condition Register Bit Assignments (Continued)
Is Condition
Bit
Register
Number
Implemented?
0
YES
Accessing the Call Processing Status Register Group's Registers
The following sections show the syntax and give programming examples (using
the HP
access the Call Processing Status Register Group's registers.
Reading the Condition Register
Syntax
STATus:CALLProc:CONDition?
Example
OUTPUT 714;"STAT:CALLP:COND?"
ENTER 714;Register_value
Reading the Transition Filters
Syntax
STATus:CALLProc:PTRansition?
STATus:CALLProc:NTRansition?
Example
OUTPUT 714;"STAT:CALLP:PTR?"
ENTER 714;Register_value
Writing the Transition Filters
Syntax
STATus:CALLProc:PTRansition <integer>
STATus:CALLProc:NTRansition <integer>
Example
OUTPUT 714;"STAT:CALLP:PTR 256"
122
S:\agilent\e8285\USRGUIDE\BOOK\CHAPTERS\hpibstat.fb
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Condition
Call Processing Active State
®
BASIC programming language) for the STATus commands used to
Comment
bit state mirrors the condition of the
Active annunciator on the CRT
display (1=ON, 0=OFF)