Table of Contents
Advertisement
Chapter 6, IBASIC Controller
Serial I/O from IBASIC Programs
Serial Port 10 Information
Serial Port 10 is sometimes called Serial Port B in Test Set documentation and
programs.
The default Serial Port 10 settings are the same as Serial Port 9. They are
1. Serial Baud rate: 9600
2. Parity: None
3. Data Length: 8 Bits
4. Stop Length: 1 Bit
5. Flow Cntl: Xon/Xoff
6. Serial_9 In (choice of Inst or IBASIC routing): Not available for Port 10
7. IBASIC and Instrument Echo: Not available for Port 10
311
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
