Table of Contents
Advertisement
Chapter 3, Operating Overview
To Enter and Change Values
To Enter Values With Exponents
Front-Panel Example
The following front-panel operation changes
1. Press the Call control key.
2. Move the cursor in front of the Confidence field.
3. Enter 9 EEX 1.
The EEX key can be used to enter values in exponential notation. Exponential
notation is only allowed on floating-point entry fields.
To Increment/Decrement Values
Incrementing and decrementing values on the Test Set can be performed from the
front panel with the CURSOR CONTROL knob or the up/down arrow keys., or
the INCR
The INCR
increment value. To change an increment/decrement setting:
Front-Panel Example
1. Move the cursor to the numeric entry field to be changed.
2. To change the current increment/decrement setting by a factor of 10, use the INCR ÷10
3. To set a specific increment/decrement value, press INCR SET, and enter the desired
GPIB Example
The following GPIB command also sets the increment value on the
Power
"DISP CCNT;CDMA:CELL:ASEC:INCR 3;INCR UP"
60
S:\agilent\e8285\USRGUIDE\BOOK\CHAPTERS\opoverv.fb
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
÷
×
10 and INCR
10 keys.
÷
×
10, INCR
10, and INCR SET keys are used to assign a specific
or INCR ×10 keys.
value.
field to 3 dBm/BW, and increments the present value up by 3 dBm/BW.
(limit) to 95.
Confidence
Sector A
Advertisement
Table of Contents
