Table of Contents
Advertisement
Chapter 6, IBASIC Controller
Method #1. Program Development on an External BASIC Language Computer
Uploading Programs from the Test Set to an External BASIC Controller through
GPIB
To upload a program from the Test Set to an external BASIC language controller
through GPIB the following program, which uses a command from the PROGram
subsystem to initiate the upload, must be running on the external BASIC language
controller. The uploaded program is stored to a file specified by the user.
In the
TransEra HT BASIC. The file is stored to the C:\HTB386 directory. If the external
BASIC language controller is an HP
the mass storage volume specifier appropriately. After running the program, the
uploaded program code will be in the designated file. Use the GET command to
retrieve the file for editing.
294
S:\agilent\e8285\USRGUIDE\BOOK\CHAPTERS\ibasic.fb
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
following program
the external BASIC language controller is a PC running
®
9000 Series 200/300 Workstation, modify
Advertisement
Table of Contents
