To Save Traces And Setups To Internal Memory Or To Overwrite An Existing Usb Mass Storage Device File - Agilent Technologies MSO6012A User Manual

7 Saving and Printing Data
To save traces and setups to internal memory or to overwrite an existing
USB mass storage device file
314
When viewed from the File Explorer Menu (Utility&File Explorer)
the trace file will have a TRC file extension and the setup file
will have a SCP file extension.
1 If you will be saving a trace and/or setup to a USB mass
storage device, connect the device to the oscilloscope.
2 Press the Save/Recall key.
3 Press the Save softkey to display the Save menu.
4 Turn the Entry knob and press the far left softkey to select
an internal memory file or USB mass storage device file to be
overwritten.
In the following screen image:
• drive0 is a USB mass storage device which has been
connected to the oscilloscope.
• C: is the root directory of the oscilloscope's internal memory.
• intern0 through intern9 are the internal nonvolatile memory
locations that can be used for storing setups and traces.
• Use the <up> selection to move up one level in the directory
structure.
6000 Series Oscilloscope User's Guide