Table of Contents
Advertisement
For Avg Power and
•
Chan Power
measurements
Manual Operation:
1. Press then release the Shift key, then press the
Meas reset key to HOLD measurement results.
2. Select HOLD again to return to Repetitive mode.
Meas Reset begins a measurement cycle, interrupting any measurement in progress.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Triggering CDMA Measurements In Local Mode (Front Panel Operation)
Repetitive retriggering is the only trigger mode available from the front panel for
the Avg Power and Chan Power measurements. Single trigger mode can be simulated
using the Test Set's measurement hold feature. Selecting the Hold key causes all
currently displayed measurement results to be held on the screen and stops the
measurement cycle. To resume making measurements press the Hold key again.
Chapter 3, Operating Overview
Preset
Hold
Meas
reset
Address
Local
Save
Recall
81
Advertisement
Table of Contents
