Table of Contents
Advertisement
Chapter 4, Status Reporting
Setting up an SRQ Interrupt
6. Define the program branch desired when an enabled interrupt occurs.
®
To cause the HP
BASIC program to branch to a subprogram called "Service_Int" when an interrupt occurs, the
following command must be executed:
"ON INTR 7,15 CALL Service_int"
PROGRAM BODY
226
S:\agilent\e8285\USRGUIDE\BOOK\CHAPTERS\hpibstat.fb
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The number 7 is the Interface Select Code, and the
number 15 designates the priority (1-15, with 15
being the highest).
!
!
ON INTR X, XX CALL Service_request
!
SUB Service_request! Handles and re-enables interrupt
Advertisement
Table of Contents
