Table of Contents
Advertisement
Error Messages
Error −284
Program currently running
Certain operations dealing with programs are illegal while the program is running. For
example, deleting a running program is not possible.
Error −285
Program syntax error
Indicates that syntax error appears in a downloaded program.
Error −286
Program runtime error
Error −300
Device-specific error
This code indicates only that a Device-Dependent Error as defined in IEEE 488.2,
11.5.1.1.6 has occurred.
Error −310
System error
Indicates that some error, termed "system error" by the device, has occurred.
Error −311
Memory error
Indicates that an error was detected in the device's memory.
Error −312
PUD memory lost
Indicates that the protected user data saved by the *PUD command has been lost.
Error −313
Calibration memory lost
Indicates that nonvolatile calibration data used by the *CAL? command has been lost.
Error −314
Save/recall memory lost
Indicates that the nonvolatile data saved by the *SAV command has been lost.
Error −315
Configuration memory lost
Indicates that nonvolatile configuration data saved by the device has been lost.
368
S:\agilent\e8285\USRGUIDE\BOOK\CHAPTERS\errorms.fb
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
