Table of Contents
Advertisement
Chapter 1, Getting Started
Changing A Field's Setting
Changing A Field's Setting
There are several types of CRT display fields in the Test Set. This section
describes some of the different types of fields, and how they are used.
Units-of-Measure Field
Figure 2
Units-of-Measure Field
Units-of-measure fields allow selection of valid units for given measurement. See
figure 2
To change a unit-of-measure
1. Position the cursor at the unit field on the display.
2. Press a key labeled with a different unit-of-measure (such as W).
To change the units-of-measure for data transfer via GPIB, see
of-Measure for GPIB Data Transfer" in chapter 3
24
S:\agilent\e8285\USRGUIDE\BOOK\CHAPTERS\getstart.fb
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
to see an example of a units-of-measure field.
If the new units are valid, the measurement value will be displayed in the new unit-of-
measure.
"To Specify Units-
.
Advertisement
Table of Contents
