To Enter And Change Values - Agilent Technologies E8285A User Manual

Cdma mobile station test set
Hide thumbs Also See for E8285A:
Table of Contents

Advertisement

Chapter 3, Operating Overview

To Enter and Change Values

To Enter and Change Values
To Enter Decimal Values
Values can be entered and changed using various methods, depending on your
testing needs. The unit-of-measure for some of these fields can also be changed
(
see "To Specify Units-of-Measure for GPIB Data Transfer" on page 56
Front-Panel Example
1. Position the cursor in front of the numeric entry field to be changed.
2. Either:
GPIB Example
The following GPIB command changes
73 dBm/BW.
"DISP CCNT;CDMA:CELL:ASEC -73 DBM;ASEC:STAT ON"
58
S:\agilent\e8285\USRGUIDE\BOOK\CHAPTERS\opoverv.fb
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Enter the number and unit-of-measure directly using the keypad, or
Press the CURSOR CONTROL knob or the Enter key to highlight the field, and use
the knob, or
Use the down-arrow and up-arrow keys to increment or decrement the present val-
ue.
to
Sector A Power
).

Advertisement

Table of Contents
loading

Table of Contents