Table of Contents
Advertisement
Error Messages
Error −183
Invalid inside macro definition
Indicates that the program message unit sequence, sent with a *DDT or *DMC command,
is syntactically invalid (see 10.7.6.3).
Error −184
Macro parameter error
Indicates that a command inside the macro definition had the wrong number or type of
parameters.
Error −200
Execution error
This code indicates only that an Execution Error as defined in IEEE 488.2, 11.5.1.1.5 has
occurred.
Error −201
Invalid while in local
Indicates that a command is not executable while the device is in local due to a hard local
control (see IEEE 488.2, 5.6.1.5). For example, a device with a rotary switch receives a
message which would change the switches state, but the device is in local so the message
can not be executed.
Error −202
Settings lost due to rtl
Indicates that a setting associated with a hard local control (see IEEE 488.2, 5.6.1.5) was
lost when the device changed to LOCS from REMS or to LWLS from RWLS.
362
S:\agilent\e8285\USRGUIDE\BOOK\CHAPTERS\errorms.fb
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
