KEB COMBIVERT F5-A Applications Manual page 94

Operating and appliance data
Parameter
SY.57 Watchdog time address
Parameter
Proc. read data 5 defi-
SY.58
nition
Proc. read data 6 defi-
SY.60
nition
Proc. read data 7 defi-
SY.62
nition
Proc. read data 8 defi-
SY.64
nition
* rw via bus; r via keyboard
Parameter
SY.59 Proc. read data 5 set
SY.61 Proc. read data 6 set
SY.63 Proc. read data 7 set
SY.65 Proc. read data 8 set
* rw via bus; r via keyboard
Parameter
SY.77 Control word S4
A compatible control or status word has been introduced in order to permit an easier replace of old S4 appli-
cations with F5.
Mapping of the control word of the S4 30F software
Bit -No. Function
0 Input I4, manual drive to higher values
1 Input I2, manual drive to smaller values
2 Start positioning
3 Input IA
4 Modulation release AND operation with ST
5 Input IB
6 Input IC
7 Input ID
8 Abort posi
9 Start approach to reference point
10 Output OUT3
11 free
12 0 = servo axis, 1 = traction axis
13...15 free
Page 7.1 - 24 COMBIVERT F5-A, -E, -H
Addr. R PG E Min. value
0039h cp- np –
ro
Addr. R PG E
003Ah * - +
003Ch * - +
003Eh * - +
0040h * - +
Addr. R PG E
003Bh * - +
003Dh * - +
003Fh * - +
0041h * - +
Addr. R PG E
004Dh RW - +
Max. value
-2 -1
Min. value Max.
value
-1 7FFFh
-1 7FFFh
-1 7FFFh
-1 7FFFh
Min. value Max.
value
1 128
1 128
1 128
1 128
Min. value Max. value
0 7FFFFh
[?]
Res. Default
1 hex -2
[?]
Res. Default
1 hex -1
1 hex -1
1 hex -1
1 hex -1
[?]
Res. Default
1 hex 1
1 hex 1
1 hex 1
1 hex 1
[?]
Res. Def-
ault
1 hex 0
© KEB, 2012-10