KEB COMBIVERT F5-A Applications Manual page 195

Motor data and controller adjustments of the asynchronous motor
Bit Meaning
3 Maximum voltage controller
4 Maximum voltage controller
5 Flux / rotor adaption mode
6 Flux / rotor adaption mode
7 Wait for magnetisation
8 Energy saving function (ASM)
9 Mode always active (ASM)
Bit 2 determines whether the drive stores the rotor adaption value on modulation switch-off. If memory ist ac-
tivated (memory: yes), the inverter starts with the last value obtained during operation after reactivation of the
modulation. If memory ist deactivated (memory: no), the inverter starts with the value 100%. After"net on",the
inverter always starts with the value 100%.
In parameter ru.59 "factor rotor adaption", the status of the rotor adaption can be read: 100% means that the
drive is working with the identified values. Values unequal 100% mean that the actual rotor resistance is = ru.59
* dr.08 (DASM rotor resistance).
© KEB, 2012-10 COMBIVERT F5-A, -E, -H
ds.04: Flux / rotor adaption mode
Value Explanation
see chapter: Torque display and limiting, section: maximum
voltage controller, voltage limit
see chapter: Torque display and limiting, section: maximum
voltage controller, voltage limit
see section: Generally adjustments for operation with motor
model
see section: Generally adjustments for operation with motor
model
see section: Generally adjustments for operation with motor
model
0: off
–
256: on
0: off
–
512: on
7
Page 7.5 - 33